Industry
2
In the first half of the 19th century, the Howell Works furnace was the heart of a large ironmaking complex of three connected buildings: the bridge house, the casting shed, and the wheelhouse, where pig iron and cast iron were produced. The furnace operated twenty-four hours a day with two twelve-hour shifts, with Sunday and part of Saturday off for workers even though the furnace itself remained in burn seven days a week, and a typical season lasted nine or ten months each year, though longer runs occurred during economic instability. The stack was loaded near the top with layers of bog iron ore, charcoal, and seashells used as flux, while air entered through pipes called tuyeres to keep the charcoal burning at a constant rate and high temperature. At about 3,000 degrees, the charge melted, the iron separated from impurities and collected in the crucible at the bottom of the stack, and it was then shaped either into bars or pigs on the dirt floor or poured into molds for cast iron objects such as kettles or stove plates. The bridge house stood at the charging level and contained a sloped ramp leading to the charging hole near the top of the stack so workers could load the materials. The wheelhouse enclosed a large water wheel that powered air pumps feeding the furnace, with the original huge bellows later replaced by piston-like pumps. The casting shed, the largest building in the complex at the bottom of the bluff, housed the furnace stack and two smaller cupola furnaces in a tall brick structure with windows and a sandy soil floor used for casting pig iron and large items such as bells and cauldrons.
Hear stories like this as you drive
ExploreHere reads historical markers out loud as you pass them: over 325,000 stories across the US. No account needed.
4.7 · 800+ ratings · Free
FIND IT
New Jersey · United States
