Science & Tech
14
A steam locomotive uses a steam engine’s ability to convert raw heat into mechanical work. The first steam locomotive engine was designed by George Stephenson in 1814 at the age of 20. A typical piston steam engine in a steam locomotive is double-acting, with a valve that allows high-pressure steam to act alternately on both faces of the piston, while a slide valve admits steam to either side of the cylinder. The valve’s control rod is usually hooked into a linkage attached to the cross-head, so the cross-head’s motion also slides the valve, and on a steam locomotive this linkage also lets the engineer put the train into reverse. Exhaust steam vents into the atmosphere, which is why locomotives must take on water at stations and why they make the “choo-choo” sound as pressurized steam escapes when the valve opens the cylinder to release exhaust. As a train starts moving, the piston begins slowly and then gains speed, with one revolution of the driving wheels for every four exhausts, producing the familiar rhythm. In a steam locomotive, the cross-head links to a main rod, and from there to side rods that drive the locomotive’s wheels.
Hear stories like this as you drive
ExploreHere reads historical markers out loud as you pass them: over 325,000 stories across the US. No account needed.
4.7 · 800+ ratings · Free
FIND IT
Hill City, South Dakota · United States
