Industry
8
Built in 1882 on the northeast end of Barn Bluff (Mt. LaGrange), the G.A. Carlson Lime Kiln was typical of about thirty lime kilns used in the Red Wing area from 1870 to 1908. Gustavus Adolphus Carlson at one time operated 12 lime kilns in Red Wing. Limestone from quarries in and around Red Wing supplied important building materials for the city and for places as far as St. Paul and Minneapolis, including cut stone for buildings, basements, walls, bridges, and bridge abutments, rough stone for rip-raps, and lime. The kiln transformed Barn Bluff limestone into commercial lime, quick lime, or unslaked lime for mortar and plaster by burning calcite limestone at 2,000 degrees Fahrenheit for several hours, driving off carbon dioxide and leaving calcium oxide. One ton, or 2,000 pounds, of limestone produced 1,000 pounds of quicklime. The Carlson kiln often employed crews of 40 to 60 men for quarrying, stone-cutting, loading and unloading the kiln, and shipping. A spur track or siding of the Chicago, Milwaukee and St. Paul Railroad ran in front of the kiln, and lime was loaded onto rail cars by wheelbarrow. Quarry work was difficult and dangerous, first relying on sledge hammers, chisels, pry bars, and muscle, then later using dynamite, which sped limestone removal but brought complaints about noise, vibrations, and falling rock; some large explosions were reported felt as far away as Ellsworth, Wisconsin, about 12 miles to the north. After nearly forty years of quarrying, local citizens protested the defacing of Barn Bluff, and together with the weakening lime industry, they brought all stone quarrying on Barn Bluff to an end in 1908. In 1910, Barn Bluff was donated to the city of Red Wing for use as a public park.
Hear stories like this as you drive
ExploreHere reads historical markers out loud as you pass them: over 325,000 stories across the US. No account needed.
4.7 · 800+ ratings · Free
FIND IT
Red Wing, Minnesota · United States
